Otherwise the installation continues with the Enterprise Toolkit screen. If your CPU supports 64 bit the 64 Bit Kernel Support screen is displayed. 1Ĭonfirm your settings with the Enter key. In our example, assume the gateway has the IP address 192.168.2.1. The gateway router must have an interface on the 192.168.2 subnet and must be able to contact the administration computer. If your administration computer has the IP address 192.168.10.5, it is not on the same subnet, and thus requires a gateway. For example, if you are using a network mask of 255.255.255.0, the subnet is defined by the first three octets of the address: in this case, 192.168.2. Note that the gateway itself must be within the subnet. You need to change the gateway value only if you wish to use the WebAdmin interface from a workstation outside the subnet defined by the netmask. The Network Configuration screen is displayed.Ĭonfigure the administrative network interface.ĭefine the IP address, network mask, and gateway of the internal interface which is going to be the administrative network interface. Note – Interfaces having an active connection are marked with. Choose one of the available network cards from the list and confirm your selection with the Enter key. In order to use the WebAdmin tool to configure the rest of Sophos UTM, select a network interface card to be the internal network card (eth0). The Select Admin Interface screen is displayed. Confirm your settings with the Enter key. You can unselect the Host clock is UTC option by pressing the Space key. Use the Tab key and the Cursor keys to switch between text boxes. If date and time are not correct, you can change them here. Use the Cursor keys to select your time zone, e.g. Use the Cursor keys to select your area, e.g. English (UK), and press Enter to continue. Use the Cursor keys to select your keyboard layout, e.g. If your system does not meet the minimum requirements, the installation will report the error and abort.Īs soon as the hardware detection is completed, the Detected Hardware screen is displayed for information purposes. IDE Intelligent Drive Electronics or SCSI Small Computer System Interface controllers.The software will check the following hardware components: The Hardware Detection screen is displayed. Pressing F3 in the start screen opens a troubleshooting screen. Note – You can always press F1 to access the help menu. The installation start screen is displayed. Installing Sophos UTMīoot your PC from CD-ROM drive or mount the downloaded ISO on a virtual drive. Help: Opens the context-sensitive help screen. by the Sophos UTM Support Team.Ĭancel: Opens a confirmation dialog window to abort the installation. The zip file can be used to solve installation problems, e.g. Remember to insert a USB stick before confirming this option. To USB Stick: Writes the installation log as zip file to a USB stick. Support: Opens the support dialog screen. Alt-F1: Return to the main installation screen.Alt-F1: Switch to the interactive bash shell.Alt-F2: Switch to the installation console.Space key: Select or unselect options marked with an asterisk.Enter key: The entered information is confirmed, and the installation proceeds to the next step. Tab key: Move back and forth between text boxes, lists, and buttons.Cursor keys: Use these keys to navigate through the text boxes (for example, the license agreement or when selecting a keyboard layout).F1: Displays the context-sensitive help screen.In order to navigate through the menus, use the following keys (please also note the additional key functions listed at the bottom of a screen): The setup program will check the hardware of the system, and then install the software on your PC. What follows is a step-by-step guide of the installation process of Sophos UTM Software.īefore you begin the installation, please make sure you have the following items available:
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |